Installation - Scheppach CRS450-20ProS Original Bedienungsanleitung

Noise and vibration
m Warning: Noise at the workplace can exceed 85
dB (A). In this case, noise protection measures are
necessary for the user (wear hearing protection!).
Noise output in dB
sound power level L 98 dB(A) (EN ISO 3744)
WA
sound pressure level L 87 dB(A) (EN ISO 11201)
pA
uncertainty K 3 dB(A)
wa/pA
Vibration value
Vibration a 20,60 m/s²
h
Uncertainty K 1,5 m/s²
h
7. Unpacking
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage. Inform the transport agent immediately of
any faults. Later complaints cannot be considered.
• If possible, store the packaging until the warranty
period has expired.
• Familiarize yourself with the machine with the help
of the operating instructions manual before using it.
• Use only original parts for accessories as well as
consumables and spare parts. Spare parts can be
obtained from your retailer.
• Please quote our article numbers as well as type
and production year in all your orders.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!

8. Installation

m IMPORTANT!
You must fully assemble the appliance before
using it for the first time!
To ensure that the Li battery pack provides long ser-
vice you should take care to recharge it promptly.
You must recharge the battery pack when you notice
that the power of the cordless equipment drops.
Removing/inserting the battery
1. To remove the battery (11) from the appliance,
press the release button (12) on the battery and
pull out the battery.
2. To insert the battery (11), place it on the guide
track and push it back into the appliance. It will
audibly snap in.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Used batteries
• If a fully recharged battery lasts for considerably
shorter operating times, the battery is used up and
needs to be replaced. Only use an OEM battery
pack replacement available from our Customer
Service.
Assembly
Only insert the rechargeable battery when the
device is completely assembled. If the device is
switched on accidentally, there is a danger of in-
jury.
Installing/changing the blade
• Always wear protective gloves when handling the
saw blade in order to avoid cutting yourself.
Caution, risk of injury!
• Do not use any blunt or bent blades or blades which
are damaged in any other way..
• Always insert a suitable saw blade.
Warning!
Always remove the battery pack before making
adjustments to the equipment.
Installing the blade:
1. Turn the chuck ring (4) in the direction of the arrow
and insert the shank of the saw blade (1) all the
way into the slot of the saw blade holder (3).
2. To lock, turn the chuck ring (4) back to the starting
position.
3. Check that the saw blade is secure by pulling on
it.
Removing the saw blade:
4. Turn the chuck ring (4) in the direction of the arrow
and pull the blade out of the saw blade holder.
For certain work, the saw blade can also be inserted
after turning through 180°.
Operation
When working with the device, always wear suit-
able clothing and appropriate protective equip-
ment. Prior to each use it must be ensured that
the device is working correctly. Personal protec-
tive equipment and a fully functional device re-
duce the risk of injuries and accidents.
After the device has been switched off, the blade
continues moving for some time. Do not touch
the moving blade and do not attempt to brake it.
Danger of injury!
21 | GB