5.
3.
INSTRUCTIONS FOR USE
Switching On/Off
To begin cooking operations, follows the below instruction
HOTPLATE
1.
Turn the knob to set the correct temperature (Fig.1).
Green indicator switch-on and blinks regularly (Fig.1 A).
2.
Turn the knob in "Zero" position (Fig. 1 B) to switch-off the
heating generator .
Hotplate heating speed is set by turning the knob
(Position 0-3). Position 3 is the maximum heating
speed.
The sensor (red LED on the glass hob) signals the
presence of heat of the associated plate (front /
rear, T ≥ 60°)
To activate the second element, turn the knob
clockwise as far as it will go, and ignite (Fig. 1/C).
OVEN
1.
Turn the knob to adjust the cooking temperature (Fig. 2
OVEN).
2.
When the green light is on it means operation is in pro-
gress (Fig. 2 A)
When the yellow light is on it means heating is in progress
(Fig. 2 B).
3.
Turn the knob to "Zero" (Fig. 2 C) to stop heat generation
The oven cooking temperature is set by turning
the thermostat knob.
(See indications on knob).
To ignite only the upper element, turn the knob to
the relevant symbol (Fig. 2/D).
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 10 -
- 10 -
10
10
A
Fig.1
Fig. 1B
Fig. 1C
A
B
Fig.2
D
C
Fig.2