After unpacking and checking the completeness of the shipment, the
Agilent 2100 Bioanalyzer system is ready to be installed. Depending on
system configuration, the installation requires up to three steps:
1 Setting up the PC.
2 Setting up the printer.
3 Setting up the Agilent 2100 Bioanalyzer.
If you have problems installing your Agilent 2100 Bioanalyzer, refer to the Troubleshooting
N O T E
section of the Maintenance and Troubleshooting Guide.
4
Installing the Agilent 2100 Bioanalyzer
System
Setting up PC and Printer
Setting up the Agilent 2100 Bioanalyzer
Agilent Technologies
86
87
85