Agilent Technologies 2100 Installations- Und Sicherheitshandbuch Seite 90

4
Installing the Agilent 2100 Bioanalyzer System
Setting up the Agilent 2100 Bioanalyzer
6 If your PC is not equipped with a serial port, use the USB/serial
7 Ensure that the power switch located at the rear of the instrument is in
The power input socket accepts a line voltage of 100-240 VAC ±10% with a line frequency
N O T E
of 50-60 Hz. Maximum power consumption is 60 VA. There is no voltage selector at the rear
of the Agilent 2100 Bioanalyzer because the power supply has a wide-ranging capability.
8 Plug the female end of the power cord into the power input socket of
90
adapter cable that is provided with the instrument.
off position.
the Agilent 2100 Bioanalyzer instrument. Plug the male end of the
power cord into the electrical outlet.