Starting The Agilent 2100 Bioanalyzer Software - Agilent Technologies 2100 Installations- Und Sicherheitshandbuch

5
Starting the Agilent 2100 Bioanalyzer

Starting the Agilent 2100 Bioanalyzer Software

Starting the Agilent 2100 Bioanalyzer Software
The Agilent 2100 Bioanalyzer software is pre- installed on bundle PCs.
However, the full functionality of the software becomes available only if
you add the required license key(s). License keys are supplied with the
2100 Bioanalyzer electrophoresis set and/or with the flow cytometry set
(see
1 Open the Agilent 2100 Bioanalyzer expert software by double- clicking
2 Select Help > Registration and highlight the Add License tab.
3 Add the appropriate license key.
For more details of adding license keys, refer to the Online Help .
N O T E
4 To establish instrument- PC communication, assign a COM- port in the
For detailed information and in case of problems, please refer to the Troubleshooting
N O T E
section of the Agilent 2100 Bioanalyzer Maintenance and Troubleshooting Guide or the
Online Help.
94
Table 3 on page 83 and
the icon on the desktop.
instrument context. When the communication is established, instrument
specific information like serial number, vendor information and
firmware version is displayed.
Table 4 on page 83).