Turning On The Agilent 2100 Bioanalyzer - Agilent Technologies 2100 Installations- Und Sicherheitshandbuch

5
Starting the Agilent 2100 Bioanalyzer

Turning on the Agilent 2100 Bioanalyzer

Turning on the Agilent 2100 Bioanalyzer
1 Turn on your Agilent 2100 Bioanalyzer. The power switch is located at
2 The status indicator lamp will light green if power is present and all
3 Once your Agilent 2100 Bioanalyzer has passed the self- tests, it is
4 Start your PC and printer by pushing the appropriate power buttons as
92
the rear of the instrument, where the power cable plugs in (see step 4
on page 89).
instrument self- tests have passed successfully.
If the status indicator lamp lights red, this indicates a hardware error.
In this case, please refer to the Troubleshooting section of the Agilent
2100 Bioalyzer Maintenance and Troubleshooting Guide or the Online
Help.
ready to run samples.
outlined in the documentation.