Configuring An Effect Module; 5�7�2�1 Modulation; 5�7�2�2 Delay; 5�7�2�3 Reverb - IMG STAGELINE DELTA-160R Bedienungsanleitung

5.7.2 Configuring an effect module

To configure the effect characteristics of a module, tap the button of
the module in the effect processor view (fig� 21)� Alternatively, keep
your finger for a while on the button of the module in the Insert
section of the corresponding channel view� The configuration view
of the corresponding effect module will appear�
When all settings have been made, tap �� to close the inner window
or tap  or  to configure another effect module�
5.7.2.1 Modulation
Modul1
Setup
EQ LS
Patch
+18
Meter
0
FX
−18
20 200
Scenes
Recorder
Gain Freq
Monitor
0.0 dB 100.0 Hz
Fig. 22 Effect modules "Modulation"
Setup options:
– type of effect under "Type ... "
Slow Chorus
Slow Flanger
Slow Celeste
Slow Rotor
– ratio between original signal "Dry" and effect signal "Wet"
– modulation frequency "Speed / Rate"
– modulation depth "Intensity"
– equalizer with low-shelf filter "EQ LS" (20 – 200 Hz, ±18 dB) and
high-shelf filter "EQ HS" (1�5 –15 kHz, ±18 dB), each with adjustable
cut-off frequency "Freq" and gain / attenuation "Gain"
Note: To adjust average values, tap the numeric fields twice�
– "Save" to save effect settings (cf� chapter 5�3�3�1)
– "Lib ... " to retrieve effect settings that have been saved
(cf� chapter 5�3�3�2)
5.7.2.2 Delay
Delay1
Setup
EQ LS
Patch
+18
Meter
0
FX
−18
20 200
Scenes
Recorder
Gain Freq
Monitor 0.0 dB
100.0 Hz
Fig. 23 Effect modules "Delay"
40
My_Mod
Lib Save Type
Dry
EQ HS
+18
0
Speed
50
−18
20k 20 200 20k
Intensity
100.0
Gain Freq
0.0 dB 6.30 kHz
Fast Chorus
Fast Flanger
Fast Celeste
Fast Rotor
Lib My_Delay Save Type
EQ HS
Dry
+18
Factor
0
−18
20k 20 200 20k
Delay Time
1.0ms
Feedback
Gain Freq
0
0.0 dB 6.30 kHz
Setup options:
– type of effect under "Type ... "
Three Echo 1/16
Four Echo 1/16
– ratio between original signal "Dry" and effect signal "Wet"
– "Tempo": speed of a music piece in beats per minute (BPM)
– setting the "Tempo": tap "Tap Tempo" rhythmically to the beat of
a music piece as an alternative to making the setting via the control
knob; when the option "Use Back" is selected, the key BACK (4)
2019/08/23
X
07:50:01
can also be used for tapping
X – multiplication "Factor" of the beat interval defined by "Tempo" to
Slow Chor
determine the "Delay Time"
Wet
100.0
– "Delay Time" resulting from the setting of "Tempo" and "Factor":
Delay Time [ms] ≈ Factor × 60 000 × 1 ⁄ Tempo
Rate
100.0
120 200
– "Feedback" (feedback effect part); defining the number of repeats
– equalizer with low-shelf filter "EQ LS" (20 – 200 Hz, ±18 dB) and
high-shelf filter "EQ HS" (1�5 –15 kHz, ±18 dB), each with adjustable
cut-off frequency "Freq" and gain / attenuation "Gain"
Note: To adjust average values, tap the numeric fields twice�
– "Save" to save effect settings (cf� chapter 5�3�3�1)
– "Lib ... " to retrieve effect settings that have been saved
(cf� chapter 5�3�3�2)
5.7.2.3 Reverb
Setup
Patch
Meter
FX
Scenes
Recorder
Monitor
Fig. 24 Effect modules "Reverb"
Setup options:
– type of effect under "Type ... "
2019/08/23
X
07:50:01
X
One Echo
– ratio between original signal "Dry" and effect signal "Wet"
Wet
100.0
– reverberation time "Time" in relation to the simulated room size
1 – equalizer with low-shelf filter "EQ LS" (20 – 200 Hz, ±18 dB) and
high-shelf filter "EQ HS" (1�5 –15 kHz, ±18 dB), each with adjustable
cut-off frequency "Freq" and gain / attenuation "Gain"
Use Back
Note: To adjust average values, tap the numeric fields twice�
Tempo
Tap
Tempo
80 BPM
– "Save" to save effect settings (cf� chapter 5�3�3�1)
0.0
– "Lib ... " to retrieve effect settings that have been saved
45 90
(cf� chapter 5�3�3�2)
5.7.2.4 Graphic equalizer
Operation of the graphic equalizer is described in the sound processing
section of chapter 5�3�3�
One Echo 1/4 Two Echo 1/8
Three Echo 1/16 Delayed
One Echo 1/4 with 4 Reflect
Reverb1 My_Revb
Lib
EQ LS EQ HS
+18 +18
0 0
−18 −18
20 200 20k 20 200
Gain Freq Gain
0.0 dB 100.0 Hz 0.0 dB
Bright Hall Warm Hall
Bright Room Warm Room
Bright Plate Warm Plate
2019/08/23
X
07:50:01
X
Bright Hal
Save Type
Dry Wet
100.0
20k
Time
50.0 %
Freq
6.30 kHz