Copyright; Before You Start - LIVARNOLUX LSLB 30 A1 Bedienungs- Und Sicherheitshinweise

LIVARNO LUX LSLB 30 A1
If you notice any smoke, unusual noises or strange smells,
switch the LED emitter off immediately. If this occurs, do not
continue to use the device and have it checked out by an
expert. Never inhale smoke from a possible device fire. If you
do inadvertently inhale smoke, seek medical attention. Smoke
inhalation can be damaging to your health.
The casing of the LED emitter must not be damaged. If the
housing is damaged, there is a risk of electric shock.
Never open the casing of the LED emitter as there are no
components inside which require maintenance. If the casing is
opened, there is a risk of electric shock.
Do not hang anything from the LED emitter. The housing is not
designed to support weights. This could damage the LED
emitter.
Never use optical instruments such as a magnifying glass to
look directly into the beam. This could damage your eyes. If
you suspect you have damaged your eyes, seek medical
attention.
There can be dangerous electrical voltages in the light and
light source which represent an acute danger.

5. Copyright

All the contents of this user manual are protected by copyright and provided to the reader for information
only. Copying data and information without the prior explicit written consent of the author is strictly
forbidden. This also applies to any commercial use of the contents and information. All texts and diagrams
are up-to-date as of the date of printing. Subject to change without notice.

6. Before you start

Remove the LED emitter and fitting materials from the packaging.
Check the LED emitter for damage. If the LED emitter is damaged, do not use it.
If the delivery is damaged or incomplete, please contact the manufacturer's customer services.
6 - English