Copyright; Prior To Use - LIVARNOLUX LLES B2 Bedienungsanleitung Und Serviceinformationen

LIVARNO LUX LLES B2
You must not hang any objects on the energy-saving outdoor spotlight. The housing is not
designed to carry loads. Otherwise, the energy-saving outdoor spotlight could be damaged.
Never use such optical instruments as a magnifying glass to look directly into the light beam. This
can lead to eye injuries. In the event of a suspected eye injury, consult a doctor immediately.

Copyright

All information contained in these instructions is subject to copyright and is provided for information
purposes only. It is only permitted to copy or duplicate data and information with the express and written
consent of the author. This also includes commercial use of the content and data. The text and illustrations
are based on the state of the art at the time of printing. Subject to change without notice.

Prior to use

Remove the energy-saving outdoor spotlight and the installation materials from the packaging.
Check the energy-saving outdoor spotlight for signs of damage. If damaged, the energy-saving outdoor
spotlight must not be used.
Only use energy-saving spiral light bulbs with E27 base and a maximum power of 23 watts!
Please note:
The supplied energy-saving light bulb is not dimmable. Do not use the energy-saving outdoor
spotlight with the supplied light bulb in circuits with dimmers.
The energy-saving light bulb (10) is stored within
the spotlight so that it can be transported safely.
Loosen the 2 screws (1) with a Phillips screwdriver
and carefully tilt the front pane (9) upwards.
Remove the packaging with the energy-saving
light bulb (10). Open the packaging, remove the
energy-saving light bulb (10) and screw it into the
socket in a clockwise direction. When doing so,
handle the energy-saving light bulb (10) by its
base and not by its glass body. The bulb should
only ever be handled with a cloth. Close the front
pane (9) downwards now and tighten the 2
screws (1) again.
6 - English