LIVARNOLUX LSLB 30 A1 Bedienungs- Und Sicherheitshinweise Seite 11

LIVARNO LUX LSLB 30 A1
Punch the rubber seal on the cable feed (e.g.
with a screwdriver) and then push the prepared
power cable through from behind.
Drill through the pre-punched mounting holes
and then draw the position of the drill holes on
the wall in order to drill holes in the wall. Fit the
wall plugs (15) into the drilled holes.
Now screw in the screws (14) to fix the
mounting plate (7) securely to the wall.
Now properly wire the power cable to the
screw terminal (9) on the mounting plate (7).
Note the labelling of the individual terminals.
Please also note the illustration [B] on the cover
page.
Symbol Wire
black or brown
L
yellow/green
blue
N
Then fix the power cable (10) by fitting the
strain relief with the 2 screws.
English - 9