Mounting - LIVARNOLUX LSLB 30 A1 Bedienungs- Und Sicherheitshinweise

LIVARNO LUX LSLB 30 A1

6.4 Mounting

The LED emitter must be wall-mounted.
Disconnect the power supply.
Undo the mounting plate (7) from the LED
emitter by removing the screw (6) using a
Phillips screwdriver.
Now press the unlock button (8) on the
mounting plate (7) and pull the mounting plate
(7) on the strap out of the housing of the LED
emitter.
Remove the 2 screws and then remove the strain
relief.
8 - English