LIVARNOLUX LSLB 30 A1 Bedienungs- Und Sicherheitshinweise Seite 12

LIVARNO LUX LSLB 30 A1
Place the LED emitter straight onto the mounting
plate (7). Press the unlock button (8) down and
push the LED emitter towards the wall until the
unlock button (8) slots into the recess in the LED
emitter housing.
Finally, use the Phillips screwdriver to turn the
screw (6) from underneath through the LED
emitter housing into the mounting plate (7).
Switch the power supply back on again.
10 - English