C) Programme Cancellation - VOLTCRAFT Charge Manager 2016 Bedienungsanleitung

Entry of Charge / Discharge Current
PARAMETERS SLOT1
SEL-PRG
>ADJ-CHA
ADJ-DIS
The selection buttons „<" and „>" can be used to select the charge current („ADJ-CHA")
first and then the discharge current („ADJ-DIS"). This is also either assumed by the button
„OK" or automatically after 6 seconds.
In the above example, the „Charge Manager 2016" starts with automatic charge current
adjustment and discharge current pre-settings of 300 mA if no input is made.
Starting additional batteries
When adding additional batteries, the last programme selected and possibly values for
discharge and charge current are suggested.
If several batteries of the same programme are processed, it is sufficient to select the
parameters for the first battery detected. After a waiting time of 6 seconds each, these
values are automatically accepted without any button pressed.
The selection buttons „<" and „>" can be used to call another programme.

c) Programme Cancellation

To cancel a running programme, the battery has to be removed from the charging chute.
46
CYCLE
AUTO
300mA