Silvercrest SSME 1000 A1 Bedienungsanleitung Seite 34

SilverCrest SSME 1000 A1
our hotline (see "Warranty information" on page 47).
There is a risk of electric shock in the case of a damaged
power cable (15).

Do not open the blender housing - it contains no
serviceable parts. Opening the housing can expose you
to the risk of electric shock.

If you notice any smoke, unusual noises or strange
smells, switch off the device immediately and remove the
plug from the mains socket. If this occurs, do not continue
to use the device and have it checked out by an expert.
Never inhale smoke from a possible device fire. If you do
inadvertently inhale smoke, seek medical attention.
Smoke inhalation can be damaging to your health.

Make sure that the power cable (15) cannot be
damaged by sharp edges or hot spots. After use, always
wind the power cable (15) back around the cord wrap
(14) underneath the motor unit (8).

Make sure that the power cable (15) cannot become
crushed or squashed.

The device must always be disconnected from the mains
when left unsupervised and before assembly,
disassembly or cleaning.

When disconnecting the mains plug from the mains
socket, always pull on the plug and never on the cable
itself.
32 - English