Wet Vacuuming - Parkside PNTS 1400 H4 Gebrauchsanweisung, Originalbetriebsanleitung

GB MT
the motor head (3), turn the cover
plate (22) a little without force until
the inside latch of the cover plate
(22) releases the folded filter (23).
You can now lightly push the folded
filter (23) onto the motor head (3).
2. Lock the folded filter (23) by turning
the cover plate slightly (22) in a clock-
wise direction:
Locking the cover plate
Unlocking the cover plate
Vacuuming with the paper filter
bag:
To avoid the fluted filter becoming
clogged, we recommend the addi-
tional use of the brown paper filter
bag.
1. Fit the fluted filter (23).
2. Fold the side flaps on the paper filter
bag (24) down on the perforation.
3. Completely unfold the paper filter bag
(24) and pull it over the internal suction
nozzle (8) in the stainless steel con-
tainer (9). The connector on the suction
nozzle must be completely enclosed by
the sealing ring on the filter bag open-
ing.
A fine dirt filter bag made of micro
filter fleece is also optionally avail-
able, which can be used in place
of the included paper filter bag (see
"Spare parts/Accessories").
38
Vacuuming with the dry filter
(fabric filter bag, optionally
available):
The anti-tear fabric filter bag, which is
optionally available (see "Spare parts/Ac-
cessories"), is suitable for vacuuming large
dirt particles.
1. Place the foam filter (
filter basket (
ing").
2. Pull the fabric filter bag over the filter
basket.
Vacuuming fine dust:
Specific suction processes (e.g. grinding
of paints and lacquers, milling or drilling
walls, grinding or drilling hard wood) can
pose a risk from hazardous dust.
We recommend using the following option-
al filter combination, which is available,
for fine dust (see "Spare parts/Accesso-
ries"):
1. Fluted filter (23).
2. Fine dust filter bag made of fleece
(optionally available see "Replacement
parts/Accessories"), which is used in
stead of the paper filter bag (24) in-
cluded in the scope of delivery.

Wet vacuuming

1. For wet vacuuming or to vacuum water,
fit the foam filter (21) to the filter basket
(27) on the motor head (3).
To avoid tearing the foam filter (21):
- Use only a dry filter;
- Before inserting, twist the edge of
the filter slightly and then roll it back.
21) on the
27) (see "Wet Vacuum-