Operation; Crevice Nozzle; Wet Vacuuming; Working Instructions - Parkside PMSSA 8 A1 Originalbetriebsanleitung

and dirty filters. See
"Spare parts/accesso-
ries".
1. Remove the collection
container (1) by pressing
the release button (3) and
detaching the collection
container (1).
2. Check that the filter holder
(11) is sitting securely
against the mechanical stop
in the collection container
(1) by lightly pressing the
filter holder (11). Due to its
shape, the filter holder (11)
can only be inserted into
the collection container (1)
in one position.
3. Check whether the filter
(12) is sitting securely in
the filter holder (11). Lightly
press the filter into the filter
holder (11).
4. Re-attach the collection con-
tainer (1) onto the device.
Place it on the underside
of the device and allow it
to latch into the interlock
release on the top side of
the device. Note the catch
on the bottom of the device
and the collection container
(1).

Operation

Crevice nozzle

The crevice nozzle (10) is suita-
ble for dry vacuuming crevices,
corners and radiators.

Wet vacuuming

• For wet vacuuming, remove
the lamella fine filter (12).
• When vacuuming liquids,
pay attention to the "MAX"
marking on the collection
container (1). The maximum
volume for liquids is 25 ml.

Working instructions

• Ensure that the collection
container (1), filter holder
(11) and filter (12) are dry
when changing directly
from wet to dry vacuuming!

Switching on/off

Before switching on,
ensure that the filter (12)
and filter holder (11)
are ready for us. See
"Initial start-up".
GB IE
31