Setting The Timer - Yamaha MCR-E320 Bedienungsanleitung

By setting the timer function, you can set this unit to play the selected input source automatically at the specified time.
1
Press TIMER on the front panel repeatedly
until "TIMER" appears on the front panel
display, and push MULTI JOG immediately.
2
Rotate MULTI JOG clockwise to select
"TIMER ON", and push MULTI JOG again.
TIMER ON
lights up in the front panel display.
3
Rotate MULTI JOG to set the time you want to
start playback. After you set the time, push
MULTI JOG to confirm.
For details about time setting, refer to steps 2 and 3 in
"Adjusting the clock" (see page 15).
4
Rotate MULTI JOG to select the input source
you want to play back, and push MULTI JOG
to confirm.
TIMER
Input source
Each time you rotate MULTI JOG, the input display
changes as follows:
CD FM

Setting the timer

STANDBY/ON
USB PORTABLE PHONES SOUND
MULTI JOG
00:00
Flashes
CD
AM USB
INPUT
MULTI JOG
VOLUME
MODE TIMER
PUSH-ENTER
TIMER
5
Rotate MULTI JOG to set the interval for
playback (30 to 90 mins), and push MULTI
JOG to confirm.
You can set the interval in 10-minute steps.
TIMER
To cancel the timer function
Select "TIMER OFF" in step 2.
disappears from the front panel display.
Note
Adjust the clock of this unit (see page 15) before setting the timer.
OFF 60
Interval
29
En