Package Contents; Safety Advice - Parkside PDSS 13 D4 Bedienungs- Und Sicherheitshinweise

Volumetric flow rate: Tyre inflator: 40–70 l / min
Air blow gun: 70–130 l / min
A-weighted sound
pressure level (L ): Tyre inflator: 84 dB(A)
Air blow gun: 87.7 dB(A)
A-weighted sound
power level (L ): Tyre inflator: 95 dB(A)
Air blow gun: 98.7 dB(A)
Uncertainty: K = 3 dB(A)
Measured value determined according to
EN 14462 (EN1953:2013).

Package contents

1 pneumatic tyre inflator
with pressure gauge
1 pneumatic air blow gun

Safety advice

PLEASE KEEP ALL SAFETY INSTRUCTIONS
AND INSTRUCTIONS FOR USE FOR FUTURE
REFERENCE!
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children unsupervised with the
packaging materials. The packaging material
poses a suffocation hazard. Children frequently
underestimate the dangers. Please always keep
the product out of the reach of children. It is not
a toy.
used, basic safety precautions must be taken in
order to avoid the risk of fire, electric shock or
personal injury. Before first using the product,
please ensure you read and follow these oper-
ating instructions in full and keep them in a safe
place. The manufacturer accepts no liability for
losses, damage or personal injury caused by a
failure to follow these operating instructions.
6 GB/IE/NI
2 extension nozzles
1 adapter set (8-piece)
1 set of operating
instructions
DANGER TO
When pneumatic tools are
The dangers stated are
foreseeable when using handheld pneumatic
equipment for generalpurpose work. However,
users must themselves consider the risks that can
occur when using the equipment for a specific
application.
DANGER OF INJURY!
Switch off the compressed air supply before
changing tools and settings or performing
maintenance.
EXPLOSION HAZARD! Never
use petrol or other flammable liquids
to clean the product! Residual fumes
in the product could be ignited by sparks and
cause the product to explode. Do not work with
the product in explosion hazard areas where
combustible liquids, gases or dusts are present.
Never work on materials which are or could
potentially be highly flammable or explosive.
For multiple hazards, please ensure you have
read and understood the safety instructions be-
fore installing, operating, repairing, maintaining
or replacing accessory parts, and before work-
ing in the vicinity of the pneumatic tyre inflator
with pressure gauge. Failure to do so can result
in serious bodily injury.
Only qualified and trained operators should set
up, adjust or use the product.
Do not modify the product. Modifications can
reduce the effectiveness of safety precautions
and increase the level of risk for the operator.
The product must be regularly maintained, so as
to verify that the required introduction / safety
instructions for pneumatic tools, rated values
and markings such as rated speed or nominal
air pressure are affixed legibly to the product.
The user must contact the manufacturer to request
replacement labels or markings if this is required.
Do not overload the product.
Never use hydrogen, oxygen, carbon
dioxide or any other bottled gas as
the source of energy for this product,
since this may cause an explosion and lead to
serious injury.
DANGER! Keep hands and other
parts of the body away from rotating
parts to avoid risk of injury.