Removing The Seat Cover - CYBEX Gold SOLUTION S i-FIX Anleitung

22

REMOVING THE SEAT COVER

The cover of the child seat consists of four parts (headrest flap, headrest, shoulder part
cover, booster cover and/or seat surface cover).
The four covers of the seat are fitted into the cover attachment channels on the edge of the child
seat and are held in position at several places by press-studs (see image).
Once all studs have been released, the single parts of the cover can be removed from the
cover attachment channels.
• Removing the cover from the headrest flap:
Pull the opening of the cover over the adjustment lever headrest so that the cover does
not get jammed on the lever when pulling it up to remove it.
• Removing the cover from the head support:
Unlock the cover from the hook at each side of the rear of the shoulder area.
Pull the cover out of the cover attachment channel.
• Removing the cover from the shoulder part:
Pull the cover out of the cover attachment channel.
• Removing the cover from the booster:
Release the 2 press-studs of the seat cover at the front and the back. Now, pull off the
cover over the armrests and along the seat surface.
In order to put the covers back on the seat, proceed in the reversed order as removing them.
!
WARNING! The child seat must never be used without the cover.