Beurer BM 93 Cardio Gebrauchsanleitung Seite 56

Measurement inaccuracy
Memory
Dimensions
Weight
Cuff size
Permissible operating con-
ditions
Permissible storage and trans-
port conditions
Power supply
Battery life
Classification
Data transfer via Bluetooth
wireless technology
The serial number is located on the device or in the battery compartment.
Technical information is subject to change without notification to allow for updates.
• This blood pressure monitor complies with European Standard EN60601-1-2 (in accordance with
CISPR 11, IEC 61000-4-2, IEC 61000-4-3 und IEC 61000-4-8) and is subject to particular pre-
cautions with regard to electromagnetic compatibility. Please note that portable and mobile HF
communication systems may interfere with this unit.
• The blood pressure monitor complies with the EU Medical Devices Directive 93/42/EEC, the German
Medical Devices Act (Medizinproduktgesetz) and the standards EN1060-1 (non-invasive sphygmo-
Max. permissible standard deviation according to clinical testing:
Systolic 8 mmHg/diastolic 8 mmHg
2x 60 memory spaces
Main unit: L 128 mm x W 128 mm x H 40 mm
Main unit: Approximately 300 g (without batteries, with cuff)
23 to 43 cm
+5 °C to +40 °C, 15 to 93 % relative humidity (non-condensing)
-25 °C to +70 °C, up to 93 % relative humidity
4x 1.5 V AAA batteries
For approx. 240 measurements, depending on levels of blood
pressure and pump pressure
Internal supply, IP 22, no AP or APG, continuous operation
Blood pressure: Application part, type BF
ECG stick: Application part type CF
® The product uses Bluetooth
band 2.400 - 2.483 GHz, maximum transmission power radiated in
the frequency band < 20 dBm, compatible with Bluetooth
smart phones /tablets
56
® low energy technology, frequency
® ≥ 4.0