Saving, Displaying And Deleting Measured Values; Usage (Ecg); Preparing The Ecg Measurement; Measuring Ecg - Beurer BM 93 Cardio Gebrauchsanleitung

Blutdruckmessgerät mit ekg-funktion

Inhaltsverzeichnis

Verfügbare Sprachen

7.6 Saving, displaying and deleting measured values

The device has two user memories. Each user memory can store up to 60 measured values. Once

all memory spaces in a user memory have been used, the oldest measured values are replaced by

the most recent.

You can access stored measured values on the device at any time. Proceed as follows:

1. With the device switched off, press the memory button M. The last stored measured value in the

selected user memory is displayed. To access the measured values in the second user memory,

press and hold the memory button M for 5 seconds.

2. To navigate between the individual measured values, press the memory button M. If you want to

delete the entire memory of the respective user, press the memory button M again and press and

hold it together with START/STOP button

Observe the following before beginning the ECG measurement:

• If the ECG-electrode surfaces are dirty, clean them with a cotton bud soaked in rubbing alcohol.

• If your skin or hands are dry, moisten them using a damp cloth before the measurement.

• Please note that there must be no skin contact between your right and left hand. Otherwise, the

measurement cannot be taken correctly.

• Do not speak or move while carrying out the ECG measurement as this can cause inaccuracies

during the measurement.

• When taking the measurement, please keep the device lying flat (horizontally) on the table.

The accuracy of the measurement as well as the ability to perform a measurement with this device

depends on the heart configuration (shape of the heart) of each individual user. If it is not possible

to take stable measurements using this device, this could have a harmless cause such as the

shape of the heart. However, the cause may also be an illness or disease.

Please note that there must be no skin contact between your right and left hand. Otherwise, the

measurement cannot be taken correctly. Stay still during the measurement, do not speak and

hold the device still. Movements of any kind will falsify the measurements.

for 5 seconds.

Inhaltsverzeichnis

Inhaltsverzeichnis