Herunterladen Inhalt Inhalt Diese Seite drucken

Saving, Displaying And Deleting Measured Values; Error Message/Troubleshooting - Beurer BC 30 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für BC 30:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Blood pressure
Systole
value category
(in mmHg)
Setting 3:
severe
red
≥ 180
hyper tension
Setting 2:
moderate
orange 160 – 179
hypertension
Setting 1:
mild hyper-
yellow 140 – 159
tension
High normal
green
130 – 139
Normal
green
120 – 129
Optimal
green
< 120
Source: WHO, 1999 (World Health Organization)
7. Saving, displaying and deleting
measured values
The results of every successful measurement are stored
together with the date and time. If there are more than
60 measurements, the oldest measurements are lost.
• Use the
button and then the
desired user memory. Pressing the +/M button displays
Diastole
Action
(in mmHg)
seek
≥ 110
medical
attention
seek
100 – 109
medical
attention
regular
90 – 99
monitoring
by doctor
regular
85 – 89
monitoring
by doctor
self-moni-
80 – 84
toring
self-moni-
< 80
toring
button to select the
27
the average value of the 3 most recent measurements
stored in the user memory. If you continue to press the
memory button +/M, the most recent individual measu-
red values are displayed in turn with the date and time.
• To delete individual measurements, you must first se-
lect them. Press and hold the memory button +/M until
appears in the display. Then confirm the deletion
with the user selection button
on the display).
• To delete measurements from a user memory, you
must first select them. Press the memory button +/M
and the average value of the last 3 saved measure-
ments is displayed. Then press and hold the memo-
ry button +/M again until
Confirm the deletion with the user selection button
(
and
appear on the display).

8. Error message/troubleshooting

In the event of errors, the error message _ appears
on the display.
Error messages may appear if:
• it was not possible to record the pulse:
• you move or speak during the measurement:
• the cuff is fastened too tightly or loosely:
• errors occur during the measurement:
• the pump pressure is higher than 300 mmHg:
• the batteries are almost empty
(
and
appear
appears in the display.
;
;
;
;
;
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis