Ice Maker; Switching The Ice Maker On; Switch The Ice Maker Off; Ice And Water Dispenser - Gaggenau RF4112 Serie Gebrauchsanleitung

Ice maker

The ice maker makes ice cubes.
The ice maker starts to make ice cubes as soon
as the appliance has reached the set temperature.
If the ice cube container is full, the ice maker
automatically switches off.
In order to prevent the ice cubes from "sticking together"
a metal endless screw rotates in the ice cube container
at periodic intervals (agitation function).
The ice maker can make approx. 1.3 kg ice cubes within
24 hours.
Do not place bottles or food in the cube container in
order to cool them quickly. The ice maker may block
and be damaged.

Switching the ice maker on

Make sure that ice maker container is its place and
D
locked into position.
Press the ice maker button
D
The symbol is lit on the display panel
Important note:
If the ice cube maker is used for the first time and/or
a long period of not being used, do not use the ice which
is produced in the first day for hygiene reasons. Throw
the ice cubes away and clean the container!

Switch the ice maker off.

Note:
Before switching off the ice maker, it is most important
that you switch the water supply to the appliance off for
a few hours.
To switch the ice maker off:
Press the ice maker button
D
12.
:
on the control panel.
.
i
:
on the control panel.

Ice and water dispenser

Remove where necessary:
- Cooled water
- Ice cubes
- Crushed ice can be dispensed as required.
!
Warning!
Do not use fragile receptacles for dispensing water
or ice risk of injury from broken glass!
Do not reach into the discharge opening
injury from the cutting blades!
Note:
- The ice and water dispenser only works when
the appliance is connected to the water mains.
- To avoid splashes bring receptacles as close as
possible to the discharge opening when removing
water and ice.
When switching on your new appliance, observe the
following:
When the appliance has been connected, there are still
air bubbles in the lines.
Run off drinking water and pour away until water can
be dispensed without bubbles. Pour away the first
10-15 glasses.

Drinking water quality

All materials used in the drinks dispenser are odourless
and tasteless.
If the water has an aftertaste, this may be caused by:
- Mineral and chlorine content of the drinking water.
- Material of the domestic water line or connection line.
- Freshness of the drinking water (if water has not
been dispensed for a long time, the water may
have a stale" taste. In this case dispense approx.
15 glasses of water and pour away).
The water filter fitted into the appliance only filters
particles from the supplied water, not bacteria or
microbes.
Risk of
49