Set The Language; Door Alarm; Variable Interior Design; Shelves - Gaggenau RF4112 Serie Gebrauchsanleitung

Set the language

When the appliance is operated, all messages are dis
played in fascia in English.
Alternatively, the display languages can be selected
corresponding to the table on page 45.
In order to change the display language:
W
Press setup button
D
Press the selection button
D
is displayed.
Press the + or setting button, until the desired
D
language is displayed.
W
Press the setup button, in order to store the
D
settings. The set temperature is displayed again
in the fascia.

Door alarm

If an appliance door is left open, an alarm signal is emitted
after one minute and a corresponding alarm message
appears in the fascia.
Close the door.
Pressing the alarm button . switches the signal off.
If the door is not closed properly again, the alarm signal
will be emitted after one minute once more.
42
.
, until
) ENGLISH

Variable interior design

You can vary the shelves inside the appliance and
the containers in the door to suit your requirements.

Shelves

The height of the glass shelves can be adapted.
Lift the compartment front and move it upwards
D
or downwards into the guiding positions.
Lower the compartment front to the desired height.
D
The holders engage into the guiding positions.
Removing the compartments:
Lift the compartment front and move it into the guiding
positions as far as the openings. Remove the compart
ment forwards.
Place the compartment into the guiding positions
openings and press downwards. Set the compartment
to the desired height.