Environmental Conditions; Service Life; Explanation Of Warning Symbols - Ottobock 1C10 Terion Gebrauchsanweisung

modular system. You can find possible restrictions in this section. Contact
the manufacturer with questions.
2 Application
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of Application
The product is recommended for mobility grade 2 (restricted
outdoor walker) and mobility grade 3 (unrestricted outdoor walk­
m°
kg
er).
Size [cm]
Max. body weight [kg]

2.3 Environmental Conditions

Allowable environmental conditions
Temperature range for use: -10 °C to +60 °C
Relative humidity: no restrictions
Chemicals/moisture: fresh water, salt water, chlorine water, soapsuds, sweat, urine
Solids: dust, sand, highly hygroscopic particles (e. g. talcum)
Clean the product after contact with humidity/chemicals/solids, in order to
avoid increased wear and damage (see Page 18).

2.4 Service Life

This product has been tested by the manufacturer with 2 million load cycles
according to ISO 22675. Depending on the patient's activity level, this cor­
responds to a service life of 2 to 3 years.
3 Safety

3.1 Explanation of Warning Symbols

Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
22 to 23 24 to 25
75
26 to 28
100 125
Ottobock | 13