Environmental Conditions; Service Life; Explanation Of Warning Symbols - Ottobock 1C68 Triton side flex Gebrauchsanweisung

The table that follows shows the suitable spring stiffness of the prosthetic
foot, matching the patient's body weight and the size of the prosthetic foot.
Body weight [kg]
up to 55
56 to 75
76 to 100
101 to 125

2.3 Environmental conditions

Allowable environmental conditions
Temperature range: –10 °C to +45 °C (14 °F to 113 °F)
Chemicals/liquids: fresh water, salt water, perspiration, urine, soapsuds, chlorine
water
Moisture: Submersion: max. 1 h in 3 m depth, relative humidity: no restrictions
Solids: Dust, occasional contact with sand
Clean the product after contact with humidity/chemicals/solids, in order to
avoid increased wear and damage (see Page 22).
Unallowable environmental conditions
Solids: Highly hygroscopic particles (e.g. talcum), continuous contact with sand
Chemicals/liquids: Acids, continuous use in liquid media
Storage and transport
Temperature range –20 °C to +60 °C (–4 °F to +140 °F), relative humidity 20 % to
90 %, no mechanical vibrations or impacts

2.4 Service life

Prosthetic foot
Depending on the patient's level of activity, the service life of the product is
2 to 3 years.
Footshell, protective sock
The product is a wear part, which means it is subject to normal wear and
tear.
3 Safety

3.1 Explanation of warning symbols

Warning regarding possible risks of accident or injury.
CAUTION
16
Spring stiffness
Foot size [cm]
22 23 24
1
−
25 26 27
2
3
4
28 29 30
−