Appliance Cleaning - FIMAR TS1 Benutz Und Wartungsanleitun

HEAT SEALERS
3. Wait about 10 minutes for the appliance to reach the correct operating temperature.
4. Put the container filled with product on the support (C).
5. Push the support completely into the appliance.
The light (A6) switches off when sealing is complete.
6. Pull out the support (C) and remove the container.
Caution - Precaution
To remove the container wear latex gloves to prevent getting burnt.

APPLIANCE CLEANING

Before cleaning the appliance (at the end of the day or when necessary) turn the power off
(or unplug the power cord).
1. Clean the container support thoroughly to remove any plastic residues.
2. Accurately clean the work surface and all surrounding areas.
3. Clean external appliance surfaces with a damp cloth or sponge.
EN
Caution - Precaution
Only clean with suitable detergents. Never use corrosive or flammable cleaning
products or products that contain substances harmful to human health.
For long periods of disuse, after cleaning and turning off appliance power (or unplugging
the power cord), adequately cover it to keep it clean.
TROUBLESHOOTING
The purpose of the following information is to help the operator to identify and correct any
anomalies or malfunctions that may occur during use.
Some faults may be resolved by the user, others require specific technical skills or abilities
and must only be performed by qualified personnel with recognised experience in the spe-
cific sector.
Important
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 1: Operating malfunctions
Problem
The equipment does not start.
Message "STA" appears on display.
Causes
Main switch off.
No mains power.
Fuse burnt-out.
The container support is in the
closed position.
- 12 -
TS - TSA
Solutions
Turn on main switch.
Contact your dealer or authorised
service centre.
Contact customer service.
Pull out the container support.
English language