Use And Cleaning Information; Control Descriptions; Tool Disk Assembly; Machine Use - FIMAR FNT Benutz Und Wartungsanleitung

3
USE AND CLEANING
INFORMATION

Control descriptions

1) Machine on button
To start the machine, press the START button
st
for mod. FNT or ON button (1 SPEED) for
mod. FNT2V
2) Stop button
Press the STOP button to stop the machine.
3) Pulse button
Hold down the PULSE button for short pulse
operations.
4) Press lever
(the machine stops when lifted;
simply lower the lever to restart the machine)
5) Machine on button
nd
Press the ON (2 SPEED) button to start
machine mod. FNT2V
6) Press pestle on circular opening
Use to accompany product (6)

Tool disk assembly

Machine use

First lower the press lever (4) and turn on the main wall switch; the green power light located over the START button
st nd st
(FNT) or 1 or 2 speed button (FNT2V) will turn on. Next press the START (1) (FNT) button or one of the two 1 (1) or
nd
2 (5) speed buttons (FNT2V) so that the relevant operating light turns on. Press and hold down the PULSE (3) button
to operate the machine for as long as the button is held down. The ejector disk conveys product out of the machine
through the exit outlet; to correctly gather product, we recommend placing a bowl under the exit outlet. To insert
product through the circular opening, unlock the pestle (6) by rotating it counter-clockwise. Simply press the STOP (2)
button to turn off the machine.