FIMAR TS1 Benutz Und Wartungsanleitun Seite 32

HEAT SEALERS
Temporary sealing time setting
1. Press and hold the button (A7).
2. Set the sealing time using the buttons (A9-A10).
3. Release the button (A7) when the value of interest appears on the display (A2).
Important
When the appliance is switched off (or another work program is used) the value does
not remain stored but instead the one programmed originally is restored.
Temporary sealing temperature setting
1. Press and hold the button (A8).
2. Set the sealing temperature using the buttons (A9-A10).
3. Release the button (A8) when the value of interest appears on the display (A2).
Important
When the appliance is switched off (or another work program is used) the value does
not remain stored but instead the one programmed originally is restored.
EN
LOADING THE REEL
1. Rest the film reel (P) on the support (B).
2. Pull out the container support (C) com-
pletely.
3. Insert the film in the film holder (Q) and
block it on the back of the container sup-
port (C) as shown in the figure.
- 10 -
TS - TSA
English language