Appliance Cleaning - FIMAR MSD/300P Benutz Und Wartungsanleitung

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ PACKAGING MACHINE WITH SEALING BAR MSD
Operation in "automatic mode"
1. Press the button (B) to start the appliance.
2. Wait until display (A) does not longer display the welcome message.
If it is the first time the appliance is used, remove any protective linings and accu-
rately clean to remove any construction material residue before starting it.
3. Press the button (C).
4. Press buttons (D-E) to select the temperature level of sealing bar.
It is recommended to select temperature level 4.
5. Press button (C) to confirm the selection.
6. Press button (F) to select the operation in "automatic mode".
7. Insert the food product into bag.
8. Insert the bag opening into decompression chamber.
9. Lower sealing bar and keep it in position until the equipment ends up the sealing cycle
of the bag.
Important
During this operation, make sure that the food product inside the bag is as far as pos-
sible from sealing bar.
Before packaging the products in vacuum mode, carry out some sealing tests on
empty bags.
Use bags with size proportional to the product to be packaged, in order not to in-
crease the working time too much.
It is recommended to use "embossed" bags.
Caution - Precaution
Do not use the equipment to package liquid or pointed products.
If it is the first time the appliance is used, remove any protective linings and accu-
rately clean to remove any construction material residue before starting it.

APPLIANCE CLEANING

Before cleaning the appliance (at the end of the day or when necessary) turn the power off
(or unplug the power cord).
1. Carefully clean sealing bar from any plastic residue.
2. Accurately clean the work surface and all surrounding areas.
3. Clean external appliance surfaces with a damp cloth or sponge.
- 11 -
GB
English language