Recommendations For Use - FIMAR TS1 Benutz Und Wartungsanleitun

HEAT SEALERS

RECOMMENDATIONS FOR USE

If it is the first time the appliance is used, remove any protective linings and accu-
rately clean to remove any construction material residue before starting it.
1. Turn the main switch (A1) (position "I") to turn on the appliance.
2. Select the work program of interest (See "Instructions for use").
3. Wait about 10 minutes for the appliance to reach the correct operating temperature.
4. Put the container filled with product on the support (C).
5. Push the support completely into the appliance.
A sound signal (A6) indicates that sealing is complete.
6. Pull out the support (C) and remove the container.
Caution - Precaution
To remove the container wear latex gloves to prevent getting burnt.
APPLIANCE CLEANING
Before cleaning the appliance (at the end of the day or when necessary) turn the power off
(or unplug the power cord).
EN
1. Clean the container support thoroughly to remove any plastic residues.
2. Accurately clean the work surface and all surrounding areas.
3. Clean external appliance surfaces with a damp cloth or sponge.
Caution - Precaution
Only clean with suitable detergents. Never use corrosive or flammable cleaning
products or products that contain substances harmful to human health.
For long periods of disuse, after cleaning and turning off appliance power (or unplugging
the power cord), adequately cover it to keep it clean.
- 18 -
TSAVG
English language