Service Data; Energy Efficiency - JUNO JB084C0 Benutzerinformation

Problem
You want to activate the
True Fan Cooking PLUS
function, but the Plus Steam
indicator does not switch on.
The water in the cavity em‐
bossment does not boil.
The water comes out of the
cavity embossment.
The display shows "12.00".

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

ENERGY EFFICIENCY

Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Possible cause
The Plus Steam does not
work.
The temperature is too low.
There is too much water in
the cavity embossment.
There was a power cut.
on the front frame of the oven cavity. Do
not remove the rating plate from the oven
cavity.
.........................................
.........................................
.........................................
Remedy
Deactivate the appliance
with the house fuse or the
safety switch in the fuse box
and activate it again.
Refer to "Setting the func‐
tion: True Fan Cooking
PLUS".
Set the temperature at least
to 110 °C.
Refer to "Hints and tips"
chapter.
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the water
with a cloth or sponge. Add
the correct amount of water
to the cavity embossment.
Refer to the specific proce‐
dure.
Reset the clock.
Juno
JB084C0 949499314
95.3
29