Operation; Switching On And Off; Fitting The Sanding Sheet; Extracting Dust - Parkside PPS 200 B2 Originalbetriebsanleitung

Operation

Switching on and off

Switching on:
♦ Press the ON/OFF switch
Switching off:
♦ Press the ON/OFF switch

Fitting the sanding sheet

WARNING!
► Always remove the plug from the mains
power socket before carrying out any work
on the appliance .
NOTE
► Before fitting a new sanding sheet
any dust and dirt from the sanding plate
and .
► Ensure that the extraction holes on the sanding
sheet match up with those on the sander plate .
♦ Position the sanding sheet
of the sanding pad
♦ Then place the sanding sheet
pad , and
place .
Different materials require different grain sizes . You
can find out which grain is suitable for which work
in our non-binding recommendations in "Work
instructions, tips and tricks" .
■ 18
│ GB│IE
to position "I" .
to position "0" .
, remove
flush on one side
, and .
on the sanding
and press it firmly into

Extracting dust

Wear a dust mask!
WARNING! RISK OF FIRE!
► When working with power tools that are
fitted with a dust collector
nected to a vacuum cleaner via the vacuum
cleaner adapter, there is a risk of fire! In un-
favourable conditions, e .g . when sparks are
flying while sanding metal or metal residues
in wood, wood dust in the dust sack (or in the
vacuum cleaner dust bag) can spontaneously
ignite . This is a particular risk if the wood dust
is mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time . Therefore, do
not allow the workpiece to overheat and
always empty the dust collector
dust bag in the vacuum cleaner before taking
,
a break from work .
Dust extraction with dust collector:
Attaching the dust collector:
♦ Push the dust collector
Removing the dust collector:
♦ Press the release button
collector
NOTE
► To ensure optimum extraction, regularly
empty and shake out the dust collector
► Perforated sanding sheets are required for
dust extraction .
Dust extraction using an external extraction
device
Connection:
♦ To remove dust using a vacuum cleaner, push
the suction hose of a suitable dust extraction
device (e .g . a workshop vacuum cleaner) onto
the nozzle
or can be con-
onto the appliance .
and pull the dust
upwards off the appliance .
.
PPS 200 B2
or the
.