Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
POWER SANDER PPS 200 B2
Introduction
Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .
Intended use
This appliance is intended for the dry sanding of
wood, metal and paintwork . Any other uses of the
appliance are considered improper and carry the
risk of serious personal injury . The manufacturer
accepts no responsibility for damage(s) attribut-
able to misuse . This appliance is not intended for
commercial use .
Features
Grip
Release button
Dust collector
Nozzle (suction)
Adapter for external vacuum extraction
Sanding plate (rectangular)
Sanding sheet
Sanding plate (triangle bottom)
Sanding plate (triangle top)
ON/OFF switch
■
14
│
GB│IE
Package contents
1 Power sander
3 Sanding sheets (120 grain)
1 dust collector
1 adapter for external vacuum extraction
1 set of operating instructions
Technical data
Nominal voltage:
Nominal power input: 200 W
Nominal speed:
Nominal
oscillation speed:
Sanding sheet
dimensions:
Protection class:
Noise and vibration data:
Noise measurement value determined in accordance
with EN 62841 . The A-rated noise level of the
power tool is typically as follows:
Sound pressure level L
PA
Sound power level L
WA
Uncertainty K:
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Vibration emission value a
Uncertainty K = 1 .5 m/s
230 V ∼ 50 Hz
(AC)
n
14000 rpm
0
n
28000 rpm
0
rectangular
112 x 112 mm
Triangle
93 x 93 x 92 mm
II /
(Double insulation)
: 78,5 dB (A)
: 89,5 dB (A)
3 dB
= 5,71 m/s
2
h
2
PPS 200 B2
Werbung
Kapitel
Inhaltsverzeichnis
