Connections - GOK FL 90-4 Montage- Und Bedienungsanletung

CONNECTIONS

Inlet, optional
Outlet, optional
NOTE
G. and H. according to EN 16129. Other connections may also be used.
Other
connections
Part No. 05 004 52 a
Low pressure regulator Type FL 90-4, Type FL 91-4
Trading name and dimensions
acc. to standard
Italian connection
• with rubber gasket and coupling nut
• G.1 = Thread W 20 x 1/14 lh
Large cylinder connection GF
• with aluminium gasket and coupling nut
• G.4 = Thread W 21.8 x 1/14 lh
Combi connection, hard
• with polyamide gasket and coupling nut
• G.5 = Thread W 21.8 x 1/14 lh
Small cylinder connection KLF
• with 5-wing coupling nut
• G.12 = Thread W 21.8 x 1/14 lh
Trading name and dimensions
acc. to standard
Ball-cone connector
• H.5 = Thread G 1/2 lh M
Screw-in connector
• H.22 = G 1/4, G 3/8, G 1/2, G 3/4 or G 1
Trading name and dimensions
acc. to standard
Test connector
• 9 mm nozzle
• with set screw
Installation
instructions
Spanner size 30
Hexagonal
Tighten hand-tight.
Installation
instructions
Torque:
20 Nm
For a screw-in
connector with
O-ring
Installation
instructions
First, loosen the
set screw with a
screwdriver, then
attach the test
hose.
5 / 12