Design; Connections - GOK VSR 0126 Montage- Und Bedienungsanleitung

Optional protective membrane
The product can be equipped with a protective membrane to prevent the regulator
membranes icing up.
Check regularly that the sieve is not blocked. A blocked sieve may increase or
decrease outlet pressures. Clean or replace as required.

DESIGN

Inlet connection
Outlet connection
Pressure gauge (optional)
Cap, non-adjustable

CONNECTIONS

Inlet, optional
14 / 64
Optional insect protection device
Insert in the breather on the 8 mm vent socket or screw into the female
thread G 1/8.
Trading name and dimensions
acc. to standard
Cylindrical female thread
• G.37 = F G 1/4, G 3/8, G 1/2, G 3/4 or G 1
• For a screw-in connector with O-ring
Italian connection
• with rubber gasket and cap nut
• G.1 = Thread W 20 x 1/14 ÜM
US POL connection
• with sealing fitting and retaining screw
• G.9 = Thread 0.880-14 NGO lh
Compression fitting
• G.22 = compr. fit 12, compr. fit 15,
compr. fit 18, compr. fit 22, compr. fit 28 or
compr. fit 35
Mitteldruckregler Typ VSR 0126
Handwheel, adjustable
Set screw in handwheel
Insect protection device (optional)
Installation
notes
Spanner size 25
Hexagonal
Spanner size 24
Hexagonal
Artikel-Nr. 01 267 50 d