Dynamic Weighing - OHAUS PX Series Bedienungsanleitung

6. Remove the reference sample and place the test
object on the pan. The ratio of the test object to the
reference
percentage.
7. To view the reference sample weight or the test
object weight, press the
If the previously established reference sample weight needs to
be kept, press
displays.
Changing printing setup. See Section 7 for more information.
Before using any application, be sure the balance has been leveled and calibrated. Clear the pan before
beginning a new Dynamic Weighing cycle.
Use this application to weigh an unstable load, such as a moving animal.
1. Press and hold the
Dynamic Weighing appears.
2. After confirmation by pressing
"Change parameter?" will appear on the screen.
3. Press
s" will display with the numeral "10" flashing. Press
or
desired.
1.800.561.8187
sample weight is displayed
when the message "Clear reference?"
, the message
, and then the message "Average time 10
to increase or decrease the value as
www.
as a
button.
button until
.com
information@itm.com