OHAUS PX Series Bedienungsanleitung Seite 18

Press and hold the
appears. Press
Sample type: Solid
Auxiliary Liquid: Water
Porous Material: Off
Water Temperature: Measure the actual water
temperature using a precision thermometer.
The water temperature is 20.0
Press or
temperature. The balance calculates water density based on
the water temperature value entered.
1. Weigh the sample in air using the balance and the density
determination kit.
When the * (symbol of stability) appears, press the
sample in the air.
2. Weigh the sample submerged in the liquid using the
balance and the density determination kit.
Lower the sample down into the liquid until it is fully
submerged.
1.800.561.8187
button until Density
to initiate the Density Determination.
by default.
to increase or decrease the value of
button to confirm the weight of the
www.
information@itm.com
.com