OHAUS PX Series Bedienungsanleitung Seite 28

Continue to follow the instructions on the display until the calibration is completed.
1. Press and hold the
Calibration Menu will display.
2. Press
calibration mode, press
calibration) is displayed.
3. Press
4. Calibration masses value will be shown in the screen.
After the display shows "Place weights" and "50.0000 g",
place weight(s) of 50 g on the pan for calibration.
5. Remove the weight(s) of 50 g from the pan. After a while,
"100.0000 g" will be displayed on the screen. Please
place weight(s) of 100 g on the pan for calibration.
1.800.561.8187
to enter the Calibration Menu. To change the
o until Linearity Cal (linearity
to begin the linearity calibration.
www.
button, and the
.com
information@itm.com