OHAUS PX Series Bedienungsanleitung Seite 10

3. After confirmation by pressing
"Clear APW?" will appear on the screen.
4. If the APW of the last Parts Counting operation needs
to be kept, press
APW?" displays.
5. Press
display with the numeral "10" (default) flashing.
6. Confirm the sample size by pressing
10 samples on the pan to display the weight. Press
or
desired.
7. Press the
of the 10 samples is used to establish the average
piece weight (APW). The display will show 10 pieces.
8. To view the piece weight or the total weight, press the
9. Place additional objects on the pan, and the
corresponding number of pieces will display.
Item Settings
The sample size ranges from 1 to 1000. The default
value is 10.
To ensure accurate counting, the minimum piece
weight should be no less than 0.1d.
1.800.561.8187
, the message
when the message "Clear
, and the message "Sample size 10" will
to increase or decrease the value as
button so that the weight
button.
www.
and place
information@itm.com
.com