Notes On Safety; Symbols; Symbols In The Manual; General Safety Instructions For Power Tools - Parkside PHS 160 D4 Originalbetriebsanleitung

GB MT

Notes on Safety

This section details the basic safety instruc-
tions for working with the appliance.

Symbols

Symbols on the Equipment
Read through the instruction manual
carefully.
Warning!
Warning! Electric shock hazard.
Always unplug the device before
working on it.
Wear ear and eye protection
Wear breathing protection
Wear safety gloves
Protection class II
Electrical appliances must not be
disposed of with the domestic
waste.

Symbols in the manual

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
34
Help symbols with information on
improving tool handling.
General safety instructions
for power tools
WARNING! Read all safety di-
rections and instructions. Omis-
sions in the compliance with safety
directions and instructions can cause
electrical shock, fire and/or severe
injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.

1) WORK AREA SAFETY

• Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
• Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
• Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapt-
er plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of elec-
tric shock.