Gb Mt; General Description; Scope Of Delivery; Overview - Parkside PHS 160 D4 Originalbetriebsanleitung

General Description

The illustration of the principal
functioning parts can be found
on the foldout page.

Scope of delivery

Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
• Device
• Dust box
• External dust extraction adaptor
• Sanding sheets
(grain size P 80 / P 120 / P 180)
• Instruction manual

Overview

1 On/off switch
2 Hand rest
3 Vent
4 Release button
dust collection box
5 Mains cable
6 Dust collection box lid
7 Tab for opening the
dust collection box
8 Dust collection box
9 Connection for dust extraction
10 Sanding plate
11 External dust extraction
adaptor
12 3 sanding sheets
13 Extraction holes
14 Mounting frame for filter insert
15 Filter insert
for dust collection box
16 5 phillips screws
17 Mounting plate

Technical Data

Detail sander .................................. PHS 160 D4
Rated input voltage (U)
Power input (P) ............................ 160 W
Idling speed (n) .....................13000 min
Oscillation rate .....................26000 min
Weight (without accessories)
Protection class .................................
Protection category ......................... IP 20
Sound pressure level
(L ) ....................... 76 dB(A);
pA
Sound power level
(L ) .....................87 dB(A); K
WA
Vibration
(a ) ................... 8,8 m/s
h
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the op-
erating cycle are to be considered,
including, for example, times during
which the power tool is turned off
and times when the tool is turned on
but is running idle).
GB MT
......230 V~, 50 Hz
..........1,1 kg
K = 3 dB
pA
= 3 dB
WA
; K= 1,5 m/s
2
33
-1
-1
II
2