Herunterladen Inhalt Inhalt Diese Seite drucken

Notes On Safety; Symbols And Icons; Direction Of Rotation - Parkside PWSA 12-LI A1 Originalbetriebsanleitung

Akku-winkelschleifer
Vorschau ausblenden Andere Handbücher für PWSA 12-LI A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 101
Uptake voltage/
Input ......................220-240 V~, 50 Hz
Voltage output/Output ..... 12 V
Protection class ............................
Protection category ...................... IPX0
The vibration values represent maximum valu-
es which have been determined with the sup-
plied blade. The actual vibration values may
vary depending on the used accessories.
The vibration values are still affected by the
handling for the user's.
Cutting disc PTS 76
(included):
Idling speed n
............. max.20300 min
0
Disc speed ....................... max. 80 m/s*
Outer diameter ..................... Ø 76 mm
Bore hole ............................. Ø 10 mm
Thickness ................................... 1 mm
*
The grinding disc must keep a rotational
speed of 80 m/s.
You can use all grinding tools mentioned in
these operating instructions.
Levels of noise and vibration were determi-
ned according to the norms and regulations
in the declaration of conformity.
The vibration emission value has been mea-
sured according to a standardised testing
method and may be used for comparison
with another electric tool.
The indicated vibration emission value may
also be used for an introductory assessment
of the exposure.
Warning:
The vibration emission value whilst
actually using the electrical tool may
vary from the given values indepen-
dently of the type and way in which
the electric tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
2.4 A
of measures to reduce vibration
II
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).

Notes on safety

Caution! When using
power tools, observe the
-1
following basic safety
measures for the prevention
of electric shocks and the
risk of injury and fire.
Please read all these instruc-
tions before using this elec-
tric tool and please keep
the safety instructions.

Symbols and icons

Symbols on the device:
Warning!
Read the manual!
Wear ear protection
Wear eye protection
Wear breathing protection
Risk of cuts!
Wear cut-resistant gloves

Direction of rotation

GB MT
81

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis