Changing The Sanding Disc; Storage; Waste Disposal/Environmental Protection - Parkside PHS 160 D4 Originalbetriebsanleitung

GB MT
2 Pull the tab (7) and remove the
dust collection box lid (6).
2. Pull the mounting frame (14) from
the dust collection box lid (6) and
remove the filter insert (15).
3. Wash the filter insert (15) with
warm water and soap and let it
dry.
Replace a heavily contaminated
or damaged filter insert (see
"Spare Parts/Accessories").
Installing the filter insert:
4. Replace the filter insert (15) and
the mounting frame (14) in the
dust collection box lid (6).
5. Then close the dust collection
box (

Changing the sanding disc

Removing the sanding
disc:
1. Remove the 5 Phillips screws (16)
on the sanding disc (10).
2. Take off the sanding disc (10).
Mounting the sanding disc:
3. Place the new sanding disc on
the mounting plate (17).
4. Fasten the sanding disc with the
5 Phillips screws (16).
5. Make sure that the sanding disc
is firmly in place.
40
8).

Storage

• Store the device in a dry place well out
of reach of children.
• Empty the dust collection box before
storing the device (see "Connecting/
removing/emptying the dust collection
box").
Waste Disposal/
Environmental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Electric units do not belong with do-
mestic waste.
• Return the unit to a recycling centre.
The plastic and metal parts employed
can be separated out and thus recycled
use can be implemented. Ask our
Service-Center for details.
• Defective units returned to us will be
disposed of for free.