Notes On Safety; Symbols; Symbols On The Equipment; Symbols In The Manual - Parkside PHS 160 C4 Originalbetriebsanleitung

G B
erating cycle are to be considered,
including, for example, times during
which the power tool is turned off
and times when the tool is turned on
but is running idle).

Notes on Safety

This section details the basic safety instruc-
tions for working with the appliance.

Symbols

Symbols on the Equipment

Read through the instruction manual
carefully.
Warning!
Warning! Electric shock hazard.
Always unplug the device before
working on it.
Wear ear protection
Wear eye protection
Wear breathing protection
Wear safety gloves
Injury hazard caused by rotating
tool! Keep hands away.
Protection class II
Electrical appliances must not be
disposed of with the domestic
waste.
6

Symbols in the manual

Warning symbols with infor-
mation on damage and injury
prevention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
General safety instructions
for power tools
WARNING! Read all safety di-
rections and instructions. Omis-
sions in the compliance with safety
directions and instructions can cause
electrical shock, fire and/or severe
injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
• Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
• Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable Iiquids,
gases or dust. Power tools create
sparks which may ignite the dust or fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.