Removing And Fitting The Battery; Fitting The Battery; Removing The Battery - Stihl FSA 90 Gebrauchsanleitung

English
FSA 90 R
The loop handle can be set to different positions to suit the
height and reach of the user.
► Switch off the trimmer, push retaining latch to position
and remove the battery.
► Loosen the screws (2).
► Move the loop handle (1) to the required position and
make sure that:
– If you are using a mowing head: a = no more than 30 cm
– If you are using a metal cutting attachment: a = no more
than 25 cm
► Tighten down the screws (2) so that the loop handle
cannot be rotated on the drive tube.
56
a
1
2

9 Removing and Fitting the Battery

9.1

Fitting the Battery

1
2
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages in position with a click.
9.2

Removing the Battery

► Stand the trimmer on a level surface.
► Hold one hand in front of the battery compartment to
ensure the battery (2) does not fall out.
1
► Press both locking levers (1).
The battery (2) is unlocked and can be removed.
9 Removing and Fitting the Battery
1
2
0458-709-9821-B