The Rivet Setting Tool Reloads More Than One Rivet; Warranty; Ce Declaration Of Conformity - Gesipa TAURUS 1 Speed Rivet Betriebsanleitung Mit Ersatzteilliste

10.3

The rivet setting tool reloads more than one rivet

Cause
Jaws are dirty
Jaws are worn
11.

Warranty

The applicable terms and conditions of guarantee shall apply and can be viewed under follow-
ing link: www.gesipa.com/agb
12. Declaration of conformity
We hereby declare that the design and construction of the tool named below, as well as the
version that we have put on the market, complies with applicable fundamental health and
safety requirements stipulated in EU directives. Tool modifications made without our authori-
sation shall render this declaration void. The safety information in the product documentation
provided must be observed. This document must be retained.
TAURUS 1-2 Speed Rivet
®
• 2006/42/EG
• DIN EN ISO 12100:2011
• DIN EN ISO 11148-1:2012
• DIN EN 82079-1:2013
Authorised documentation representative:
GESIPA Blindniettechnik GmbH
Nordendstraße 13-39
D-64546 Mörfelden-Walldorf
pp Dr. Richard Gärtner
32
Remedy
Clean and oil sliding surfaces (point 8.1)
Replace (point 8.1)