Overview; Lockbolt Setting Tool; Use For Intended Purpose; Safety Information - Gesipa PowerBird SRB Betriebsanleitung Mit Ersatzteilliste

GB
1.

Overview

Pos. Description
A Nosepiece
B Steel head sleeve
C Grip jaw housing
D Grip jaw
E Support ring
F Support ring
G Adapter
2.

Lockbolt setting tool

2.1

Use for intended purpose

The lockbolt setting tool must only be used for the purpose of setting lockbolts as described in
these operating instructions. Observe the safety information!
2.2

Safety information

Caution!
The following safety rules must be observed to ensure adequate protection against
electric shocks, injuries or fire hazards:
• Never overload the lockbolt setting tool; work within the specified working capacity.
• Never use the lockbolt setting tool in a humid or wet environment or close to flammable
liquids or gases. Danger of explosion!
• Ensure that the battery is properly secured in the handle.
• Always remove the battery when the lockbolt setting tool is not in use and for
maintenance.
• Never use the lockbolt setting tool as a hammer.
• When not in use, keep the lockbolt setting tool in a dry, closed room and out of the reach
of children.
• Always wear protective goggles when working with the lockbolt setting tool. Personal pro-
tective equipment such as protective clothing, gloves, safety helmet, non-slip footwear,
ear protection and fall arresting device is recommended.
• The air inlets for the motor should not be obstructed; do not insert any objects into them.
18
Abb.
1
1
1
1
1
1
1