How To Set A Speed Rivet - Gesipa TAURUS 1 Speed Rivet Betriebsanleitung Mit Ersatzteilliste

7.4

How to set a speed rivet

• Connect the rivet setting tool to the compressed air network.
• The black button must be activated in order to insert the speed rivet into the rivet setting
tool.
7.4.1 Spreader nosepiece without opening mechanism
• Insert the speed rivet with mandrel spring into the spreader nosepiece until the mandrel
spring is attached to the spreader nosepiece.
• Push the front sections of the spreader nosepiece forwards against the spring force.
• Push the previously inserted speed rivet out in order to open the spreader nosepiece.
• With the spreader nosepiece open, insert the speed rivet with mandrel spring
so that only one speed rivet protrudes.
7.4.2 Spreader nosepiece with opening mechanism
• Turn the knurled ring to the right or left to open the spreader nosepiece.
0.13 24.01.13 -
Rev.: Datum Aenderung:
Zeichnung wu
Datum Name
Bearb. 24.01.13 J. Kolle
Gepr. - H. Harder
GESIPA Blindnie
64546 Mörfelden
27