Tips For Use; Mounting Option For Transformer; Use; Manually Adjustable Sections - Auping Match 355 Gebrauchsanweisung

3.5 Tips for use

A new mattress has a certain amount
of rigidity, which will disappear within
a few days. Consequently, your mat-
tress will not optimally follow the
contours of the mesh base when it is
initially adjusted. We therefore
recommend that you lie down on the
mattress while adjusting the positions
for the first time.
3.6 Mounting option for
A mounting plate is clicked to the
back of the transformer. If you wish,
this can be used to fix the
transformer, for instance to the wall.
1. Slide the mounting plate A off the
2. Screw the plate to the wall with
3. Slide the transformer, with the
Important! Be sure to remove the
transformer from the mounting plate
before moving the bed.
GB 6
transformer
transformer.
the spring-mounted clip B pointing
downwards.
mains connection on the left, over
the mounting plate.

4. Use

4.1 Manually adjustable
sections
Foot end
The foot end has six adjustable
positions.
Carefully pull on the handle until the
desired position is reached.
To put the foot end into a lower
position you must first pull it up as
far as it will go and then lower it
again.
Head support*
The head support has five adjustable
positions.
Carefully pull on the handle until the
desired position is reached.
To put the head support into a lower
position you must first pull it up as
far as it will go and then lower it
again.
fig. 6
* Type 359 only